Step Up Your Cubing Game: Learn How to Lubricate Cube

Rate this post

Are you looking to take your cubing skills to the next level? If so, you’ve come to the right place. In this blog post, lubricationfaqs is going to discuss a crucial technique that can greatly improve the performance of your cube: lubrication. Whether you’re a beginner or an experienced cuber, learning how to lubricate cube can make a significant difference in its speed and smoothness. So, if you’re ready to step up your cubing game, keep reading to discover the secrets of effective cube lubrication.

About Cube Lubricant

To make puzzle blocks move more freely and smoothly, lubricant (also known as lube) is added to the blocks. The springs can be re-tightened, and depending on the need, magnets can be added or subtracted from the Rubik for a better hand feel. The smooth sensation that Lube produces cannot be had, nevertheless, under any circumstances. It is comparable to a motorcycle that requires oil to operate properly. improved control or increased speed. The viscosity of the Rubik lubricant has an entirely bearing on this.

Types of Lubricant

The Cube can be lubricated with a number of lubricants (lubes). Some lubricants are more suited for lubricating the Rubik’s cube’s overall surface, while others are especially designed to lubricate the center. The Rubik’s Cube can be smoother or easier to rotate with the use of lubricants. Even the Cube can be slowed down using lubricants.

There is no one size fits all lubricant because it depends on the Rubik’s Cube being used and the Cube itself. Different lubricants have various effects on blocks. Different lubricants have different effects on the Cube’s static and dynamic friction. Kerosene (also used as a skin lubricant), silicone oils, shock oils, differential oils, home-made lubricants, and water-based oils are some of the lubricants used on Cubes.

Although there are many different kinds of Rubik lubricants and they can be formed of a variety of materials, it is advised that you use silicon- or PFPE-based lubricants since they are suitable and secure for Rubik materials. In addition, there are various lubricants made of oil (such Petroleum Base, WD-40, etc.), but they come with instructions for use.

1. Silicon-Based

Synthetic silicon-based lubricants. Because Silicone does not disintegrate or harm Rubik’s plastic material, it is used in nearly all of their modern lubricants, which are regarded as the best lubricants for plastics. Maru Lubricant, Cubicle Silicone Lube, and other brands of this sort of lubricant are some examples.

2. Water-Based

A water-based lubricant that nonetheless improves the efficiency of your Rubik. But this kind of lubricant frequently loses its potency fast. They should only be applied to the surface of plastic objects; do not use them on metal objects like screws or springs because doing so will result in corrosion. Some water-based lubricants, like DNM-37, have undergone modifications to extend their useful lives.

3. PFPE-Based

Perfluoropolyethers, or PFPE, is a synthetic oil developed by DuPont. Because of their excellent resistance to friction degradation caused by chemical and temperature, they are frequently employed in the aircraft sector. Due to its low evaporation rate, this lubricant has the extra benefit of having a long service life and works well with Rubik’s materials. The T-Minus One Speed Cube Oil (T-1) is the standout item of this kind.

4. Petroleum-Based

These are lubricants that contain oil, such Vaseline, WD-40, and Liquid Wrench. It is not advised to use them with Rubik’s cubes. However, if you do decide to use them, proceed with extreme caution as they can corrode and melt the plastic, destroying the components and mechanisms inside. But in other circumstances, such as with brand-new Cubes with high hardness, this form of lubricating can aid in boosting their speed.

How to Lubricate Cube

Speed blocks and other challenging puzzles require lube, a specific silicone lubricant. The rotating parameters of the cube can be modified and its internal workings can be shielded from quick wear and tear by using a speed cube lubricant. Adding lubricant will help your magic cube receive the attention it needs after you’ve cleaned it. Using lubricant is also an option if you notice a decline in your cube solving abilities or if your cube starts producing strange noises when turning.

How to Lubricate Cube

You can use these steps to lubricate the Cube:

You must disassemble your cube and clean each component separately in order to clean it. Place one thumb on the corner piece of the cube and the other thumb on the edge piece to spread it out.

Remove any grit on the tenons of the corner, edge, and center pieces with a soft toothbrush. Use an electric toothbrush in its place. They are extremely excellent at removing even tenacious debris from the grooves because of their long bristles.

In the space left by spreading the cube, drop 2 or 3 drops of lubrication. To lubricate the area around the corner where the lubricant is poured, turn the three sides of the corner. To the first corner you lubricated, repeat this step diagonally.

The kind of Rubik and the Lubricant itself both influence how many drops of lubricant should be inserted. Some types of lubricants have diverse purposes, while others merely require a drop to speed up or a couple of drops to slow down. In order to prevent your Rubik from malfunctioning, understand the directions for using the Lubricants.

To remove any extra speed block lubrication from the block parts, use a kitchen towel or bath towel. Microfiber cloth that is loosely knit should not be used since it can scratch the plastic. Your speed block’s performance will suffer as a result.

After giving the cleaned components some time to dry, put your cube back together. Before you assemble the metal cube, make sure that every component is absolutely dry to avoid corrosion. Contact magnets work in a similar manner.

With a moist cloth, wipe the tiny blocks’ exterior to remove any remaining grease and oil from the skin. So that nothing gets into the cracks of your cube, use very little soap, if any at all, and only a tiny bit of water. Use just a fabric that won’t scratch the cube’s surface here.

Rubik shouldn’t be used right away after lubrication; instead, you should wait about 10 minutes. You should try using Vaseline applied first for Cubes that are already too tough to use, rather than applying Lubricant right away, which will make them even harder to use. You should wipe them off after a week or two and then apply Lubricant.

You may also like: Unlocking Smooth Typing: Learn How to Lubricate Keyboard Switches

Winding Up

In conclusion, learning how to lubricate your cube is a crucial step in stepping up your cubing game. By applying the right lubricant and understanding the different methods of application, you can greatly improve the speed and smoothness of your cube’s movements. Lubrication not only enhances your solving experience but also prolongs the lifespan of your cube. So, don’t hesitate to invest some time in learning this essential skill and unlock your full cubing potential.

Leave a Comment