Unlocking Smooth Typing: Learn How to Lubricate Keyboard Switches

Rate this post

As technology continues to advance, our reliance on computers and keyboards has become greater than ever before. Whether it’s for work, school, or personal use, typing has become an essential part of our daily routine. However, as we type away, we may notice that our keyboard switches feel stiff or unresponsive. This can be frustrating and slow down our typing speed. In this blog post, we will explore a solution to this problem and discuss how to lubricate keyboard switches. So, if you’re ready to unlock smoother typing, keep reading!

Why do we need Lubricate Keyboard Switches?

When you lubricate the switch, you help the housing, stem, and spring all function more smoothly in addition to making it simpler for the stem to move. Every tiny component of the switch encounters friction, which can be reduced by lubricants, hence minimizing material flaws.

Benefits of Lubricate Keyboard Switches:

  • With clicky switches in particular, reducing the noise of the switch when pushing the key has an audible impact.
  • Improves the smoothness and ease of stem movement inside the switch. hence lessening hand strain and preventing excessive hand fatigue from prolonged use.
  • After some use, the components in the switch’s components become more stable and less likely to shake.
  • A lubricant switch will give you the chance to feel a fresh click sensation similar to a totally new custom spring if the switch in use does not have the option to be customized with various levels of actuation accessible.

In which cases should Lube Switch not be used?

  • You shouldn’t use lubrication if your mechanical keyboard is sufficient for you and you don’t need to push more forcefully, that much is certain.
  • If you really enjoy the sensation of a notch when pushing a key on a tacticle or clicky switch, avoid lubricating it because doing so will make the switch less notched and quieter.
  • Furthermore, using lubricating arbitrary will void the warranty on your mechanical keyboard if it is still covered by one!

How to Lubricate Keyboard Switches: A Step-by-Step Guide

1. Firstly, take the switch out of your keyboard

You’ll need to take the switch out of your keyboard unless you’ve tucked it away in a different bag. The keyboard must be taken apart, along with its cover, so that the switches on the PCB can be re-solder. Ensure that the keyboard is always turned off before proceeding.

2. Remove the switch

The switch needs to be pulled out now that it has been taken out of the keyboard. Using a switch puller, a specialized tool you can purchase from a 3D printing shop or locate online, is the simplest method.

By loosening the four clamps holding the top case and bottom case together, you can operate the switch. At first, this might seem a little intimidating, but as you get used to it, it might go by quickly. Making sure the switch doesn’t snap back together after you’ve loosened one of the clamps is the trickiest part. After you’ve loosened the clamp, it’s preferable to insert your fingernails between the top case and bottom case.

3. Lubricate the lower case

When greasing the lower case, you’ll want to exercise a little caution. If at all possible, try to avoid lubricating the metal foil because doing so could harm your switch. We advise lubricating the inner switch floor, the area where the stem rails contact, and the interior and outside of the cylinder.

4. Stem Lubrication

You merely need to be cautious with the foot when lubricating the stem. If you have a linear switch, I just advise lubricating your feet. On a tactile switch, you can lubricate the foot, but doing so would lessen the tactile bump, thus it is not advised. No matter what kind of switch you have, you should lubricate the rails and the cylindrical area where the spring makes contact with the body.

5. Lubrication of Upper Housing

It’s really simple to lubricate the top case. Only the areas where the body rails and top housing are in touch are necessary. The remainder of Upper Housing can be omitted.

6. Assemble the switch

It’s time to combine all the ingredients now. The most crucial step is using the metal foil with considerable caution. Reverse the order of the parts and snap the switch back together. Verify that the switch is functioning properly and that you cannot feel any vibrations. Pull the switch out once more and reinstall it if it doesn’t function properly.

7. Attach the switch to the keyboard

Reinstalling the switches inside your keyboard is now complete once they have been greased. If you have hot-swappable keyboards, all you need to do is insert them into the corresponding socket. They must be re-solder to the PCB if they are not already.

8. Connect the keyboard and run tests

The keyboard must be plugged in once again before testing the switches. If a key doesn’t function, the switch may not have been correctly soldered or the plug may not have been inserted into the socket. If that isn’t the issue, it’s possible that the metal foil inside the switch has been harmed; in this instance, a new switch will likely be necessary.

How to Lubricate Keyboard Switches: A Step-by-Step Guide

Wrapping Up

In conclusion, lubricating keyboard switches can significantly improve the typing experience by reducing friction between the switches and the keycaps. This simple and affordable technique can help extend the life of your keyboard and prevent unnecessary strain on your fingers. Whether you are an avid gamer or a professional writer, a well-lubricated keyboard can make a world of difference. So, don’t hesitate to try this easy DIY solution and enjoy smoother and more comfortable typing today!

Above is the information that lubricationfaqs has provided, hope readers will find it useful and share widely!

Leave a Comment