How to Lubricate a Throttle Cable: A Step-by-Step Guide

Rate this post

Welcome to our blog, where lubricationfaqs are here to provide you with valuable information and helpful tips. In today’s post, we’ll be diving into a topic that many may find useful – the lubrication of a throttle cable. Whether you’re a car enthusiast or simply looking to maintain your vehicle’s performance, understanding how to lubricate a throttle cable can make a significant difference. So, without further ado, let’s explore this step-by-step guide and learn the ins and outs of this important maintenance task. Stay tuned for all the details coming up!

How Often do Throttle Cables need to be Lubricated?

Every year or anytime the accelerator pedal starts to stick, you should oil the control cables on your motorcycle. It is obvious that very fuel-efficient machines, dirt bikes, and those used in the winter months may need more maintenance depending on the frequency and circumstances of cycling. This is really ignored far too frequently, especially when you consider the repercussions of locking or damaging your clutch or throttle cables.

Consider obtaining an air compressor first if your motorcycle has extremely grimy or sticky wires or if it has been more than ten years since it was last oiled. You can blow away any debris, water, or dust from the cable sheath with the blower attachment. Simply insert the tip into the cable’s input and blow till you are happy.

The throttle wire and clutch cable both have open ends on the majority of contemporary fuel-injected bicycles. The cable will often be located inside the carburetor housing if your bike has one. If so, you must remove the cable end from its housing before lubricating in order to prevent mixing the carb with lubrication from a dirty cable.

Once the cables are attached to the bike, you can maintain them, but removing the parts makes the operation simpler and creates less mess. Before removing the wires to inspect them for wear or breakage, take images to confirm the routing. Give yourself enough time to order replacement components and install them if they are damaged, worn out, or frayed.

How to Lubricate a Throttle Cable

Both sides of the throttle cable box should be moved out of the way after removing the two bolts on the back. In order to avoid problems during reassembly, pay particular attention to the cable routing.

How to Lubricate a Throttle Cable

In essence, you attach a rubber stopper to one end of the cable, place a tube from the silicone-based cable lubricant cartridge in a small hole, and compress the nozzle. Through the cable, the lubricant is forced by the box’s pressure. As soon as the cable’s bottom end starts to bubble or drip, apply lubricant in brief bursts. Construct the cable sheath in batches because it takes time for the lubricant to pass through.

You’ll know you’re finished when clear liquid (often rubber boots) emerges from the clutch cable’s opposite end. Before water droplets harm the engine, a strategically placed cloth will capture them. In order to force all of the leftover oil inside the tool out through the cable, press the thin metal cylinder.

Make sure to lubricate every area where the cable might rub before reassembling each cable. Any exposed cable should be covered with a protective coating, and fittings at the ends of the cable need to be lubricated. You can lubricate parts in tight spaces with the aid of a little paintbrush.

You may also like: Learn How to Lubricate RV Slide Outs Like a Pro

What is the Best Lubricant for Throttle Cable?

Two primary types of control cables exist. The first is a tried-and-true cable made of multi-strand wire that is encased in a spring-loaded steel sheath. The second item is a high-tech plastic item with a Teflon coating. In general, Teflon lined cable does not require lubrication, and oiling it may even be harmful to its health. To find out what lubricants, if any, are advised, consult your owner’s handbook or your mechanic.

Unlined cables need to be oiled with a specialist pressure lubricant and aerosol spray, both of which are readily accessible at any motorcycle shop. Remove the cable from the throttle rod or drum and grease it. Install the appropriate tool for each image, then press down on the entire assembly until the lubricant emerges from the other end.

Some individuals might believe that any lubricant will work, but nothing could be farther from the truth. Use of WD-40 or any other penetrating oil should be avoided since some cables have a glossy inner sheath that will stick if subjected to harsh solvents or chemicals. If you don’t have the proper aerosol product, conventional motor oil works quite well.

We selected the Motion Pro Cable Luber V3 since lubricating cables is made much simpler, quicker, and cleaner with this particular instrument. Despite the fact that I’ve used “normal” cable lube in the past, it’s always been a pain for me because it leaks everywhere but the cable sheath. Their new design is far superior.

Winding Up

In conclusion, lubricating a throttle cable is a simple yet crucial maintenance task that can greatly improve the performance and lifespan of your vehicle. By following the step-by-step guide outlined above, you can ensure smooth and responsive throttle control, minimizing the risk of cable binding or sticking. Regularly lubricating your throttle cable will also help prevent premature wear and tear, saving you time and money on potential repairs. So, take the time to properly lubricate your throttle cable and enjoy a smoother and more enjoyable driving experience.

Leave a Comment